Revised: 12/16/2015
N:\AmTryke\Manuals and Instructions\New Manuals\Manual Docs and Pdf\JT2000
You need the following tools for assembly (too see a picture of different tools,
see page 24):
Wheels
Start assembling your tryke by attaching the wheels to the rear and main
frames. First, attach the back wheels to the rear frame:
1.
Remove the 22 mm nuts and flat washers from both ends of the axle and
slide wheels over each side.
2.
Replace the washers and nuts on each side of the axle and tighten using a
22 mm socket or adjustable wrench.
3.
Place the black nut covers on top of the wheel nuts on each side. Lightly tap
with the palm of your hand to secure in place.
Step 1
Directional arrow
NOTE: Pay attention to directional arrows on the tires.
CAUTION:
DO NOT TO OVER TIGHTEN WHEEL NUTS.
WHEEL BEARINGS MAY BE DAMAGED.
Axle
TOOLS REQUIRED:
5 mm Allen wrench (incl.)
8 and 10 mm wrench/socket
14 and 15 mm wrench (incl.)
22 mm socket or adjustable wrench
Needle nose pliers
Phillips head screwdriver
