Documax 5380 User’s Manual
- 37 -
4.6 Explaining Menu Terms
Options Description
LANGUAGE
Specify the printer menu language as English or Chinese.
EMULATION
Specify printer's control commands.
CHAR. MODE
Select ASCII or Chinese character mode to print when printer receives character
printing task.
FONT
Specify a kind of ASCII fonts to print when printer receives character printing task.
If the print data with font instruction, printer gives priority to print data instruction.
(Only valid when CHARACTER MODE is choosing ASCII)
ENG PITCH
Specify the ASCII character spacing in characters per inch (cpi).
CHI PITCH
Specify the Chinese character spacing in characters per inch (cpi).
SLASH ZERO
Select the printing character for zero with a slash (/) or without, to distinguish it
from the letter O.
INTL CHAR SE
Specify the printer internal character set according to different using circumstances
of international characters.
CHAR. SET
Specify character set as Italic Character or Graphic Character.
LINE SPACING
Specify the line spacing in lines per inch (lpi). If the print data with vertical pitch
instruction, printer would give priority to print data instruction.
FORM LENGTH
Specify the page length of the form, for both cut sheet and continuous paper.
Printer feeds to next page according to the specified page length. If the print data
with page length instruction, printer would give priority to print data instruction.
FORM LOCK
After selecting this function on, printer would lock the page length setting. Printer
feeds to next page according to the current setting parameter and would not
affected by the page length instruction of the print data.
PAGE SKIP
After selecting this function on, printer would leave one inch (25.4mm) margin at
the perforation of the tractor paper automatically. If the print data with page margin
instruction, printer would give priority to print data instruction.
COMPRESS PRT
After selecting this function on, printer would print out transverse compressed
content according to the specified percentage in normal speed. When
auto-compress mode is selected, printer would detect paper width automatically
and choose the proper percentage to print.
LEFT MARGIN
Specify the distance between paper left edge and printing home position. (Only
valid when ANY POSITION PAPER FEED function is on.)
BLACK MARK
After selecting this function on, printer would carry out black mark detect instruction
so that to make the vertical positioning printing precisely. (Bills or papers should
have black mark on the surface.)
PRINT DIR
Select the printing direction of the print head: unidirectional, bidirectional or
selected via software.
HIGH DENSITY
After selecting this function on, printing definition would enhance while the print
speed reduce.
QUIET MODE
Disable or enable the low noise function, when this function is on, print speed
would be reduced.
