Documax 5380 User’s Manual
- 29 -
Note: When the top of form position (black mark position) is maximal, press LOAD/EJECT key, the
printer will not increase any more.
When the top of form position (black mark position) is minimal, press LF/FF key, the printer
will not decrease any more.
4.4 Tear-off Adjustment Mode
There is a tear-off bar at the edge of the window cover. When you have finished printing, you can
advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily tear off the
perforated sheets. The tear-off setting determines the distance between the perforation of tractor paper
and the tear-off bar.
Adjusting method:
After installed the tractor paper correctly and ensure the paper select lever is in tractor paper
position .Press
LOAD/EJECT
key to feed the paper to printing position, then press
ONLINE
key to
enter into offline mode, press
LOAD/EJECT
key to feed the paper to tear off position. With the printer
online, press both the
LOAD/EJECT
and
LF/FF
keys for about 3 seconds to get the printer to enter the
tear-off adjustment mode. When the printer enters this mode, the
ONLINE LED
and the
COPY LED
blink alternately.
Use the
LOAD/EJECT
and
LF/FF
keys to alter the tear-off setting (The maximum removable size of
tear off position is based on the default zero position.):
LOAD/EJECT:
Press the
LOAD/EJECT
key to adjust the distance in 1/60 inch increments. You can
maximum increase to +100/60 inch.
LF/FF:
Press the
LF/FF
key to adjust the distance in 1/60 inch decrements. You can maximum
decrease to -40/60 inch.
To exit and save your new setting, press
ONLINE
key. The
COPY LED
and the
ONLINE LED
blink
simultaneously twice with two beeps, then the
ONLINE LED
will be on. Your new tear-off setting value
is saved.
Note: When the tear off position is maximal, press LOAD/EJECT key, the printer will not
increase any more.
When the tear off position is minimal, press LF/FF key, the printer will not decrease any
more.
4.5 Changing the Printing Settings
Documax 5380 printers divide printer settings into three sections: Quick menu setting, Menu setup
mode and Online-aptitude Parameter Settings.
4.5.1 Quick Menu Setting
Press
ONLINE
key for about 3 seconds when the
ONLINE
LED
blinks, the printer beeps once and
enter into quick menu setting.
Facility key for copy mode:
Press
LOAD/EJECT
key once can switch between copy modes. The
COPY LED
off denotes the
NOTE
To exit without saving, just turn off the printer.
NOTE
To exit without saving, just turn the printer OFF.
