The
label feeder in operation 47
ALF19 Series
5.1 Troubleshooting
Tools or aids
• Slotted screwdriver 3 mm
Fig. 13 Slotted screwdriver
• Stamp tweezers
Item number: 19509685
Fig. 14 Stamp tweezers
Paper jam
ATTENTION
Damage to the label feeder due to unsuitable tools.
If you use tools with pointed or sharp edges when manually removing labels from
the label carrier or from the label feeder,
the label conveyor belts can be damaged!
Always use stamp tweezers to manually remove labels..
If there is a paper jam at the label feeder, the label feeder automatically stops the
label transport. Follow these steps to clear the jam:
Take the label feeder out of the pick-and-place machine.
Slightly lift the locking flap.
Use the screwdriver to turn the screw for manual label carrier transport clockwise
while at the same time carefully pulling the label carrier back through the feed
opening.
Summary of Contents for ALF19 Series
