AMS ALF19 Series Operating Instructions Manual Download Page 31 | Manualshive

Page: 31 / 66

AMS ALF19 Series Operating Instructions Manual Download Page 31

Preparing

the label feeder for operation 31

ALF19 Series

4.2 Unpacking the label feeder

Tools or aids

• Cutter

• Scissors

ATTENTION

Damage to the packaging due to improper transport.

Improper transport

can damage the packaging and thus also the label feeder!



Before unpacking, examine the entire packaging for any

transport damage.
Only when the packaging is undamaged can you start unpacking.



If you find any damage to the packaging, notify the carrier and us immediately.



Take the label feeder and other accessories out of the packaging.

Note

• We recommend keeping the original packaging in its original condition for any
possible future shipping.

ATTENTION

Incomplete delivery.

The label feeder is only fully functional with all components.
Operating an incomplete label feeder

can impair functionality!



Check that the delivery is complete.



If the delivery is incomplete, please contact us immediately.



The label feeder is unpacked and ready for assembly.

4.3 Power supply

«
...
29
30
31
32
33
...
»

Summary of Contents for ALF19 Series



































































Reviews:

No comments