6
AMROTEC®
Safety Precautions
Please read the safety precautions below before operating X-1 Currency Discriminator Counter.
These safety precautions guideline must be observed to avoid any potential hazards that could
resulted in personal injuries or damage to X-1 Currency Discriminator Counter.
Electrical Safety!
To avoid the risk of electrical shock, fire, or damage to X-1 Currency Counter:
1.
Do not remove the side, and bottom covers in any situation.
2.
Do not disassemble X-1 by yourself.
3.
Do not use damaged or worn power cords or plugs. Use the power cord supplied inside the
original packaging carton and connect to a properly grounded power outlet or to a power
strip. The power source for X-1 is between AC 90V~240V, 60 Hz.
4.
Keep metal objects, such as paper clips, away from the hopper and stacker. If an object does
fall into the unit, turn off the power and unplug X-1 immediately. Contact an authorized X-1
service provider for assistance.
5.
Keep liquids away from X-1. Do not operate the Currency Counter if it is wet. Also, do not
touch the Currency Counter if you are wet. If a spill occurs, turn off the power and unplug
X-1 immediately. Contact an authorized X-1 service provider for help.
The Currency Counter may start operating automatically in certain circumstances. Therefore, it
is important to always follow these below precautions:
1.
Do not wear loose clothing or jewelry while operating the Currency Counter.
2.
Make sure that your hair does not touch the Currency Counter.
3.
Do not touch banknotes that has been placed in the stacker while the motor is running.
4.
Turn off the power before performing any maintenance or error corrections that require you
to put your hands into the machine.
5.
Keep X-1 away from magnets, activated cellular phones, electrical appliances, or speakers
within 13 cm / 5 inch.
Cautions!
●
Keep drinks, food, and other foreign objects away from the
Currency Counter.
●
Placing foreign objects on or into the Currency Counter can
interrupt operation of the machine.
Summary of Contents for X-1 Series
Page 38: ......
