DRAFT - HIGHLY CONFIDENTIAL
Operating X-1
11
Power On / Off
To Power on X-1,
Plug one end of the power cord into the back of the machine and the other end into a standard
AC power wall outlet (properly grounded) or to a power strip.
Turn on the Power Switch button On ("I") the right side of the device.
After initializing, X-1 will enter into main display.
To Power off X-1
Confirm that all of the counting results are saved prior to powering off the machine.
Turn off the Power Switch button to Off ("O").
Placing Bills on the Note Hopper
To operate the device without malfunctioning, please follow the below instructions:
Avoid counting wet, excessively dirty or spoiled banknotes.
Check for foreign object mixed with banknotes, i.e.: paper chips, rubber bands, clips, dust, etc.
which will jam the bill path or even may damage the sensors.
Prior counting, remove severely folded or curled banknotes from the stack of banknotes to be
counted.
Align all the corners and edges of banknotes to avoid rejection of banknotes to reject stacker.
Put the banknotes in the middle of the note hopper and adjust the hopper guide for better
feeding of banknotes.
Summary of Contents for X-1 Series
Page 38: ......
