Ampro LittleBoard 800, Reference Manual

Page: 71 / 96

Chapter 4 BIOS Setup
LittleBoard 800 Reference Manual 65
NOTE This feature allows you to use any one of the three common formats
available for CompactFlash cards without having to re-format the
CompactFlash card before you can use it on the LittleBoard 800. The
LBA (Logical Block Address) is set as the default format because it can
handle larger drives and is the newest format available, but may not be
the one used to format your CompactFlash card. The other common
formats that may be encountered are the Physical (below 512MB) or
Phoenix (physical above 512MB) formats.
User Interface Options
•
Keyboard and Mouse (Configuration)
♦
Numlock – [ Disabled ] or [Enabled]
♦
Typematic – [Disabled] or [ Enabled ]
These fields are used for the keyboard.
•
Delay – [ 250ms ], [500ms], [750ms], or [1000ms]
This field is used for the keyboard and determines how many milliseconds the keyboard
controller waits before stating to repeat a key, if the key is held down on the keyboard.
•
Rate – [ 30cps ], [24cps], [20cps], [15cps], [12cps], [10cps], [8cps], or [6cps]
This is a keyboard field and determines the rate, in characters per second, the keyboard
controller will repeat a key, if the key is held down on the keyboard.
♦
Initialize PS/2 Mouse – [Disabled] or [ Enabled ]
∗
If this field is set to [Enabled], the BIOS will initialize the PS/2 mouse.
∗
If the PS/2 mouse is [Disabled], the BIOS will not initialize the PS/2 mouse, which may
not be recognized by the Operating System.
•
User Interface
♦
Show “Hit <Del>…” – [Disabled] or [ Enabled ]
This field, if Enabled, will place “Hit Del” on screen during the boot process, to indicate when
you may press “Del” to enter the BIOS Setup menus.
♦
F1 Error Wait – [ Disabled ] or [Enabled]
∗
If this field is [Enabled], the BIOS will display an Error message indicating when an error
has occurred during POST (power on self test) and wait for you to respond by hitting the
F1 key.
∗
If [Disabled], and an error occurs during POST, the BIOS will attempt to continue the
boot process.
♦
Config Box – [Disabled] or [ Enabled ]
This field, if Enabled, displays the Configuration Summary Box, which list all of the
configuration information for the system, at the completion of POST, but before the Operating
System is loaded.