INTRODUCTION
2
D-0115690-C (OM001)
– Otowave 102 Operating Manual
1.5.
STANDARD CONTENTS AND OPTIONAL ACCESSORIES
STANDARD COMPONENTS
Otowave 102 Tympanometer
Set of disposable ear-tips
4 x 1.5 V ‘AA’ Batteries
Carrying case
Calibration certificate
Warranty card
OPTIONAL COMPONENTS
Additional sets of ear tips
Probe tip
8002592
1
Portable thermal printer
Seal (in probe tip)
8002009
1
Additional rolls of thermal printer
paper
Infra-red USB Adapter
Note:
If the thermal printer has been purchased it should be charged for a minimum of 15 hours
before being used. Refer to the printer instructions for further details.
1.6.
WARRANTY CARD (UK CUSTOMERS ONLY)
Please complete the enclosed warranty registration card and return it to Amplivox. This will enable us to
register your purchase, help with your enquiries and provide technical support.
1.7.
GUARANTEE
All Amplivox instruments are guaranteed against faulty materials and manufacture. The instrument will be
repaired free of charge for a period of two years from the date of dispatch if returned, carriage paid, to the
Amplivox service department. Return carriage is free of charge for customers in the UK and chargeable for
overseas customers.
The following exceptions apply:
The pressure pump and transducers may go out of calibration due to rough
handling or impact (dropping)
The lifetime of probe, probe seals and ear tips is dependent upon conditions of
use. These parts are only guaranteed against faulty materials or manufacture.
1.8.
WARNINGS
Throughout this manual, the following meanings of warnings and cautions apply:
The WARNING label identifies conditions or practices that may present danger
to the patient and/or user.
The CAUTION label identifies conditions or practices that could result in damage
to the equipment.
1
Applied part as according to IEC 60601-1
WARNING
WARNING
CAUTION
