Amphenol Kaye CTR-40, User Manual, Page: 52 / 84

41
8 Controller Operation
C 40.00
set-points are independent from the programmable set-points described in Sec-
tion 8.3.1, Programmable Set-points.
Number of program set-points
Use the “UP” or “DOWN” buttons to change the number from 2 to 8.
New number of program set-points
Press “SET” to continue. Press “EXIT” to ignore any changes and to continue.
S
Save new setting
8.6.2 Set-points
The next parameters are the program set-points.
First set-point
Use the “UP” or “DOWN” buttons to select any of the set-points.
Third set-point
Press “SET” to be able to change the set-point.
Set-point value
Use “UP” and “DOWN” to change the set-point value.
New set-point value
Press “SET” to save the new set-point value.
The other set-points can also be set in the same manner. Once the set-points are
programmed as desired press “EXIT” to continue.
E
Continue to next menu function
8.6.3 Program Soak Time
The next parameter in the program menu is the soak time. This is the time, in
minutes, that each program set-point is maintained after settling before pro-
ceeding to the next set-point. The duration is counted from the time the temper-
ature reaches the set-point.
Soak time in minutes
Pn=8
Pn=3
1 50.0
3 30.0
C 30.00
Pt=15