Amphenol Kaye CTR-40, User Manual, Page: 51 / 84

40
8 Controller Operation
Un= C
ProG
8.5 Temperature Scale Units
The temperature scale units of the controller may be set by the user to degrees
Celsius (°C) or Fahrenheit (°F). The units are used in displaying the bath tem-
perature, set-point, vernier, proportional band, and cutout set-point.
The temperature scale units selection is accessed after the vernier adjustment
function by pressing “SET”. From the temperature display function access the
units selection by pressing “SET” 4 times.
Scale units currently selected
Press “UP” or “DOWN” to change the units.
U
Change units
New units selected
Press “SET” to accept the new selection and resume displaying the bath
temperature.
S
Set the new units and resume temperature display
8.6 Ramp and Soak Program
The ramp and soak program feature allows the user to program a number of
set-points and have the instrument automatically cycle between the tempera-
tures, holding at each for a length of time. The user can select one of four dif-
ferent cycle functions.
The program parameter menu is accessed by pressing “SET” and then “UP”.
Well temperature
S+U
Access program menu
Program menu
Press “SET” to enter the program menu
S
Enter program menu
8.6.1 Number of Program Set-points
The first parameter in the program menu is the number of set-points to cycle
through. Up to 8 set-points can be used in a ramp and soak program. These
Un= F
| 100.00 C