AMPEON AMP-Series
http://www.ampeon.cn
10
adjustment of parameters in the parameter unit, you must confirm through tests and
adjust the L2 distance.
2.2 The installing of control box
a. The control box is directly connected to the pipe. It can be hung to the two
sides of the metal pipe connected to it (figure 10.a) and it can also be directly hung to
the installing screw in the two sides of the control box (figure 10.b). Or otherwise
under the special condition that installed straight pipe distance is limited, the control
box can also be horizontally installed to the vertical pipe (figure 10.c).
b. The connecting pipe with observing window is directly connected to the
control box (figure 10). The connecting pipe with observing window is designed for
the convenience of the test of spark inspection function.
Figure 10
.
a
Figure 10.b
Figure 10.c
Figure 10: Diagram of control box installin
▲Caution
！
The control box installing control panel should face the direction that is easy to
operate and control. The foreside and backside should not be close to the wall for the
convenience of maintenance and repair. The observing window should also face the
