REB175P
USER’S GUIDE
122
122
I can no longer connect to the Range Extender wirelessly.
a.
Power on and off the Range Extender and try again.
b.
The connection to the Source Network may be down. Use an Ethernet cable and connect directly to the
Range Extender / Bridge. Access
http://setup.ampedwireless.com
and run through the Basic Setup
Wizard again. After you have successfully reset the Source Network connection, try connecting
wirelessly again.
The connection to the Source Network seems slow. File transfers take a long time to transfer.
a.
You may be too far away from your Source Network. The closer the Range Extender / Bridge is to your
Source Network, the better its connection will be. The Range Extender / Bridge must have a strong
signal in order to repeat the signal with fast speeds and further range. Move the Range Extender /
Bridge closer to your Source Network and try again.
b.
Check that your antennas are fastened tightly to the antenna connectors.
c.
You may be downloading from the Internet and not within your Source Network or Extended Network.
Files transferred through the Internet are limited by your ISP speed and the data download speeds from
the website that you are downloading from.
d.
Your computer may be using an older Wi-Fi adapter with lower speed limits and range capabilities
(802.11b/g/n).
