ISUPS2B004 Rev 1
Page 64 of 70
Ampcontrol Pty Ltd
– ABN 28 000 915 542
ISUPS 300Wh V2 USER MANUAL
ISUPS2B004 R2
– DEC/17
APPENDIX B – APPROVALS
The Ampcontrol IS-UPS, in all of its revisions, is Ex-certified equipment - designed for use in explosive
atmospheres. The following list is the Certifications, which are relevant for the IS-UPS.
IECEx TSA 10.0008X (Certificate of Conformity)
o
IEC 60079.0: 2011 Ed 6.0
– Explosive atmospheres – Part 0: General requirements
o
IEC 60079.7: 2011 Ed 5.0
– Explosive atmospheres – Part 7: Equipment protection by
increase safety “e”
o
IEC 60079.11: 2011 Ed 6.0
– Explosive atmospheres – Part 11: Equipment protection by
intrinsic safety “I”
o
IEC 60079.18: 2011 Ed 4.0
– Explosive atmospheres – Part 18: Equipment protection by
encapsulation “m”
Copies of this certificate may be obtained in the following ways:
From the Ampcontrol website,
By contacting customer service, or
From the IECEx website.
EMC Compliance
IEC 61204-3: 2011 - Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility
(EMC)
Mains Powered
-
Ex eb ia mb [ia Ma] I Mb
Techniques eb (mains input), ia (keypad) and mb (input power module) are used for
Zone 1
located
equipment. The [ia] outputs can be fed into the
Zone 0
area.
Battery Powered
-
Ex ia I Ma
Equipment can be located in a
Zone 0
area.
