manualshive.com logo in svg

Ampcontrol ISUPS 2, User Manual

Share
Download
Ampcontrol ISUPS 2 User Manual Download Page 48

 

 

 

 

ISUPS2B004 Rev 1 

 

 

Page 48 of 70 

Ampcontrol Pty Ltd 

– ABN 28 000 915 542 

ISUPS 300Wh V2 USER MANUAL 

ISUPS2B004 R2 

– DEC/17 

10.8.2 Tripping Output Menu 

                                                                                

Tripping OP: 

>       Relay 1< 

 

Press the RIGHT button to access this menu. 

The Tripping Output menu allows the output relay to be selected. Pressing UP or DOWN will select the 
relay. Pressing ENTER will save the selection. 

 

NOTE 

 

Selecting a relay on this menu will override any other function assigned 

to the relay. De-selecting a relay or turning off the Trip / Reset Latch 

function will not return the relay to its’ previous setting. This must be 

done manually on the relevant menu. 

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

 

 

Summary of Contents for ISUPS 2







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands