Ampco Pumps Company K-Series Metric Maintenance Manual M-033 Rev A 11.16
6
Assembly – KC2 w/ IEC80 MOTOR
*Refer to the parts list in Table 1 appended to this manual for the part name and quantity.
1)
Begin with the bare motor. Ensure that the shaft and C-face areas are clean. Attach the
motor adapter (1) to the motor using the supplied hardware.
2)
Attach the stub shaft (2) and shaft locking collar (3) to the motor and the motor adapter (1)
as shown in Figure 1. Leave the shaft collar loose until Step 5.
Figure 1: Motor Adapter Installation
3)
Place the rear cover (5) into the adapter plate (4) and rotate clockwise to lock into place.
Figure 2: Rear cover to Adapter Plate
