background image

En-1

Name and Shape

Q’ty

Application

Screw (M4 x 16mm)

2

For installing the remote 
controller

Binder

1

For remote controller and 
remote controller cable 
binding

Tapping screw (M4 x 14mm) 
(*1)

1

For installing the remote 
controller cable to the indoor 
unit

Cable clamper (*1)

1

For installing the remote 
controller cable to the indoor 
unit

(*1)  Use only if the remote controller cable must be modifi ed for the indoor 

unit model.

3. ELECTRICAL REQUIREMENT

When connecting the remote controller use the following wiring.

Cable

Cable size

Remarks

Remote controller 

cable

0.33 mm

2

Sheathed PVC cable, 

Polar 3 core

*  We recommend that you purchase our service parts for the remote 

controller cable. Contact service personnel to purchase this.

4. SELECTING AN INSTALLATION 

LOCATION

4.1. Dimensions

75

120

14

60

11

18

6

12.5

4.5

8

4

9

83.5

47.5

Unit : mm

hole × 2

hole × 2

4.2.  Name of parts

2

1

3

4

5

Display panel

1. SAFETY PRECAUTIONS

•  Let the customer keep this installation manual because it is needed when 

the air conditioner or remote controller is serviced or moved.

WARNING

This mark indicates procedures which, if improperly 
performed, might lead to the death or serious injury 
of the user.

•  For the air conditioner to operate satisfactorily, install it as outlined in 

this installation manual.

•  Installation work must be performed in accordance with national wiring 

standards by authorized personnel only.

•  Do not turn on the power until all the installation work is complete.

CAUTION

This mark indicates procedures which, if improperly 
performed, might possibly result in personal harm 
to the user or damage to property.

•  Do not wire the remote controller cable and the bus wire together with 

or parallel to the connection cables, transmission cables, and power 
supply cables, of the indoor and outdoor units. It may cause erroneous 
operation.

•  When installing the bus wire near a source of electromagnetic waves, 

use shield wire.

•  Do not set the DIP switches, either on the air conditioner or the remote 

controller, in any way other than indicated in this sheet or the manual 
that is supplied with the air conditioners. Doing so may result in an 
accident.

2. ACCESSORIES

The following installation parts are supplied. Use them as required.

Name and Shape

Q’ty

Application

Installation manual

1

This manual

Operating manual

1

Instruction book for 
operation

Remote controller cable

1

For connecting the remote 
controller

Connecting cable (*1)

1

For connecting the remote 
controller cable to the wall 
mounted type indoor unit

Contents

1. SAFETY 

PRECAUTIONS 

................................................................. En-1

2. ACCESSORIES 

............................................................................... En-1

3. ELECTRICAL 

REQUIREMENT 

........................................................ En-1

4.  SELECTING AN INSTALLATION LOCATION
 4.1. 

Dimensions 

............................................................................... En-1

 

4.2.  Name of parts ........................................................................... En-1

5.  INSTALLING THE REMOTE CONTROLLER
 5.1. 

Installation 

................................................................................ En-2

 

5.2.  Setting the DIP switch .............................................................. En-2

 

5.3.  Connection of Remote Controller Cable ................................... En-2

6. INSTALLATION 

METHODS

 6.1. 

Group 

control 

............................................................................ En-3

 

6.2.  Dual remote control .................................................................. En-3

7.  TURNING ON THE POWER ............................................................ En-4
8. FUNCTION 

SETTING 

...................................................................... En-4

9. TEST 

OPERATION 

.......................................................................... En-5

10.  FILTER LAMP RESET ...................................................................... En-5
11. ERROR CODE 

................................................................................. En-5

INSTALLATION MANUAL

SIMPLE REMOTE CONTROLLER

9371068114-04

9371068114-04 EN.indd   Sec1:1

9371068114-04 EN.indd   Sec1:1

6/27/2557 BE   10:55 AM

6/27/2557 BE   10:55 AM

AMP Air Conditioning

www.ampair.co.uk | sales@ampair.co.uk

Summary of Contents for UTY-RSNYM








Reviews: