[email protected] • 813.978.3900
–6–
INSTALLATION & MAINTENANCE GUIDE
AMP
®
LED Hardscape Lights
AHS-67XX Series
Install Luminaire
5
Install the luminaire and glare guard using provided self-tapping screws. If
the screws are difficult to install, mark holes and drill 1/8” pilot holes.
If wall anchors are required, drill proper holes from the marks on the
mounting surface and then insert the wall anchors. Then install the
luminaire and glare guard and secure them with the self-tapping screws.
Rubber washers are required during installation from the side.
NOTE: DO NOT OVER TIGHTEN SCREWS.
Return to Step 3 to complete the wire connections.
Self-tapping
Screw
Luminaire
Railing, Deck
over-hang or Stair
Mark
Install from Bottom
Install from Side
Self-tapping
Screw
Luminaire
Mark
Wireway
Hole
Railing, Deck
over-hang or Stair
Wireway Hole
Glare Guard
Wall Anchor
Rubber
Washer
Glare Guard
