NE1415W
SIMPLE
STEP ENTRY SYSTEM w
/
GATE
IMPORTANT INSTRUCTIONS: Read all instructions carefully & completely to become familiar
with parts, assembly, safety and proper use of this product. Failure to follow these
instructions may result in serious personal injury. DO NOT DEVIATE FROM THESE
INSTRUCTIONS & PLEASE REVIEW WITH ALL USING THIS POOL ENTRY SYSTEM
TOOLS REQUIRED: 7/16" socket or nut driver, measuring tape, level, Phillips (star)
screwdriver, utility / trimming knife, a 5/16", 1/4" & 1/8" drill bits & drill and a pad lock
SAFETY INSTRUCTIONS & PROPER USE
•
This pool entry system has a 300 lb load capacity - one person - when properly installed
•
The entry is designed and intended for use with an above ground pool only (flat bottom)
•
Your above ground pool has shallow water - absolutely NO DIVING or NO JUMPING into the pool
•
The entry system with gate conforms to the latest revisions of the APSP & ANSI recommended standards for above
ground/on ground swimming pool steps (when properly assembled & installed as per manufacturer’s recommendations)
•
For entry & exit of the pool face steps at all times. Use extended handrails at all times for additional safety
•
This step system includes a protecting gate - NEVER use entry system without gate attached and fully functional. When
pool is not in use, make certain gate is securely closed, latched and locked at all times to prevent unwanted entry & injury
•
Ensure the bottom of the side support stringers are free of debris & any possible sharp edges as not to damage the pool
liner. Use of a ladder or step pad (sold separately) is highly recommended for extra protection & life of the pool liner
•
Locate pool steps on a solid / flat base both inside & outside pool. Do not use entry system with “dished” bottom pools
•
IMPORTANT: Secure entry system to pool structure for stability and safety - follow instructions closely
•
Keep all handrails, platform and treads free from obstructions to avoid possible injury. Do not secure any items to the pool
entry. Such objects (eg. thermometers, toys, ropes) may create a potential for tripping or entrapment & injury can occur
•
NEVER ALLOW CHILDREN TO SWIM UNATTENDED - Nothing replaces parental supervision at all times
•
Assemble and install this pool entry system as per the manufacturer’s instructions. Do not deviate from these instructions
as serious personal injury or drowning may occur - PLEASE ALWAYS SWIM SAFELY & RESPONSIBLY !
•
Please review all instructions for proper use and safety with all individuals using this pool entry system to prevent injury
Step 1: IDENTIFY
PARTS
Top Platform - 1 pc
Upper Handrails - 4 pcs
2 Left & 2 Right
Lower Handrails - 4 pcs
2 Left & 2 Right
Stringers - 4 pcs - 2 Left & 2 Right
R
L
Latch Shield
1 pc
Gate Hinges (inner & outer)
2 sets
Gate Stop - 1 pc
Gate - 1 pc
Tread-Riser - 2 pcs
( with light hole)
Tread-Riser - 4 pcs
( without light hole)
Half Bottom Riser - 2 pcs
Half Top Tread - 2 pcs
TREAD - RISERS FOR GE POOL STEPS (32")
