AMOT 02GGH, Installation, Operation And Maintenance Manual

Page: 38 / 84

38
Pneumatic Actuator 82046L
Rev 5 – MAY 2019 OMMGGP00185
8. Apply Grease to components:
When actuator has been disassembled it is recommended that all used soft
parts like O-ring seals, guide bands, wear strips and circlip are discarded and
replaced with the parts supplied in the repair kit. Before re-assembly the
components will require an application of grease such as Castrol High
Temperature grease (or equivalent):
Table 3 Grease Details
Part Section of part Amount of grease
O-rings: A Completely Light film
Housing Parts: B Piston bore Light film
C Top pinion bore Light film
D Bottom pinion bore Light film
Piston Parts: E O-ring & bearing groove Light film
F Rack teeth Half the teeth depth full with
grease
G Piston bearing Light film on outside
H Piston rack bearing strip Light film
Piston Parts: J Pinion bottom & O-ring
groove Light film
K Pinion top & O-ring
groove Light film
L Gear teeth Half the teeth depth
M Pinion top bearing Light film (inside and out)
N Pinion bottom bearing Light film (inside and out)
Fig 19 Parts requiring grease
A
M
K
L
J
N
A
C
B
D
A
A
H
F
E
A
A
G