28
ARX 4
120
8531
|
03.
07.
2012
3.1
General work safety
●
The roller may only be used for driving and compacting unbound layers (gravel,
soil) and blacktops (asphalt). Other uses are prohibited.
●
Rollers may only be operated with all safety devices. Manipulation or disregard of
safety devices and regulations invalidates the CE conformity.
●
Before starting every shift, check the effectiveness of the operation and safety de-
vices and that the protection devices are in place.
●
Check the steering and brakes when you start work. If defects are apparent roller
operation is not permitted.
●
If you identify any defects on the safety system or defects that impair safe opera-
tion of the equipment, inform your supervisor immediately. The roller may no lon-
ger be operated.
●
If you identify any defects which endanger safe operation, cease operation imme-
diately.
●
Only perform work on and clean the roller if it is stationary and secured from rol-
ling away.
●
Switch off the engine when filling the fuel tank. Do not fill up fuel in closed rooms.
No open flames.
●
Do not vibrate on slopes or inclines where there is a hazard of slipping or overtur-
ning.
●
Do not drive on slopes that are steeper than the maximum climbing capacity of
the equipment. Always drive the roller carefully perpendicular to the slope dip.
●
Do not vibrate inside buildings and on instable ground.
●
Keep the driver’s position and steps free of trips, grease, dirt, ice, etc.
●
The driving and working field of view may not be obstructed in any way. Adjust all
the necessary mirrors correctly and keep them clean.
●
Switch off the engine before leaving the roller. Secure the roller from unauthorized
start-up and rolling away.
●
Take suitable measure to secure lowered rollers that pose an obstruction.
●
Never work under the influence of drugs, alcohol or medicines that impair con-
sciousness.
●
Only operate the roller in good general light conditions and good workspace illu-
mination.
●
The operator's workplace is on the seat of the driver's platform. The roller may not
be operated from any other position.
3.2
Roller operation
DANGER
Rollover hazard when driving the roller!
• Only start the roller from the driver’s position.
• No persons may stand in front of or behind the roller while it is
in operation.
• Persons necessary for operations at the sides of the equipment
must remain at a safe distance of at least 1 m.
!
Summary of Contents for ARX 36
