Ammann ARX 36, Original Manual

Page: 99 / 152

Maintenance 99
120
8531
|
03.
07.
2012
Fig. 9-14 Hydraulic oil filler neck
NOTE Observe the table of lubricants in chapter 9.15 .
9.10.3 Draining the hydraulic oil
NOTE Only drain the hydraulic oil at operating temperature.
• The oil flows better.
• Residues in the tank will be flushed out with the oil.
1 Place a container (with at least a 30 liter capacity) under the hydraulic oil drain.
2 Remove the hydraulic oil tank lid.
3 Remove the hydraulic oil drain plug (1) under the roller.
4 Allow the oil to drain into the container.
5 Install the hydraulic oil drain plug (1) .
5.1
Secure the screw connections with Loctite special and tighten by hand, not with
torque.
Observe the table Torque: Drain cock / hydraulic tank , Page 112
Fig. 9-15 Hydraulic oil drain
NOTE When you drain the hydraulic oil, please also replace the hydraulic oil filter.
See chapter
9.10.5 .
NOTE Tighten the screw connections in the hydraulic tank hand tight.
1
2
3
1