Ammann ARX 36 Original Manual Download Page 34

Page: 34 / 152

ARX 4

120

8531

03.

07.

2012

3.5.2

Notice stickers

Tab. 3-3 Notice stickers on board

Relationship to roller:

Driver’s position.

Requirement:

Wear a safety belt!

Explanation:

Always wear the safety belt when in the driver's seat.

Warning stickers

Meaning

Notice stickers

Meaning

Relationship to roller:

On rear chassis, front right.

Designation:

Guaranteed sound power level.

Explanation:

Indicates the overall noise level produced by

the roller.

Relationship to roller:

Front chassis, left.

Designation:

Hydraulic oil drain.

Explanation:

Drain hole for the hydraulic oil

Relationship to roller:

Front chassis under the cooler.

Designation:

Motor oil drain.

Explanation:

Drain hole for the motor oil

Relationship to roller:

Front chassis, right side, over the

filler neck.

Designation:

Fuel.

Explanation:

Filler neck for diesel fuel.

Summary of Contents for ARX 36

























































































































































Search results

Summary of Contents for ARX 36

Reviews:

Related manuals for ARX 36

Brands by name

Popular brands

Ammann ARX 36, Original Manual

Search results

Summary of Contents for ARX 36

Reviews:

Related manuals for ARX 36

Brands by name

Popular brands