Ammann ARX 36 Original Manual Download Page 66

Page: 66 / 152

ARX 4

120

8531

03.

07.

2012

7.12.3

Switching on continuous sprinkling

On the instrument
panel

Turn the sprinkler switch from

Pos. 0

Pos. 1

The sprinkler switches on.

On the operating
lever

Press the bottom button

(1)

The sprinkler stays on as long as you are pressing the button.

NOTE

In the combined roller, operating lever sprinkling is used only for tire sprin-
kling.

7.12.4

Switch on interval sprinkling

Turn the sprinkler switch from

Pos. 0

Pos. 1

The sprinkler switches on.

Turn the switch further to the right.

The interval sprinkler switches on.

Interval times: Turn the switch continuously toward the right to adjust the sprin-
kling intervals infinitely.

7.13

Simple/double vibration

Item 0

OFF

Item 1

Interval sprinkler

WARNING

Danger to life through slipping or caving in of the roller!

• Do not use vibration on steep embankments or at steep angles!
• Do not vibrate inside buildings and on unstable ground!

Summary of Contents for ARX 36

























































































































































Search results

Summary of Contents for ARX 36

Reviews:

Related manuals for ARX 36

Brands by name

Popular brands

Ammann ARX 36, Original Manual

Search results

Summary of Contents for ARX 36

Reviews:

Related manuals for ARX 36

Brands by name

Popular brands