14
-
5
Figure 14
-
2: Torque Wrench Effective Length
L
is the lever length of the wrench as measured
from the center of the drive to the center of the
grip.
The effective length of the torque wrench,
measured along the centerline of the torque
wrench, is the sum of
L
and
A.
14.7 Easy Lock Removal and Assembly
Removal:
1.
Remove the EASY LOCK
®
tab with a screwdriver (Figure 14
-
3).
2.
If the guard is chained, remove or hold back the chain to prevent it from blocking the bearing.
3.
Turn the bearing in the direction as indicated in Figure 14
-
4. Then slide guard off the bearing.
Assembly:
1.
Align the bearing tabs with the guard bell slots.
2.
Slide the bell onto the bearing.
3.
Turn the bearing to lock it in place.
4. Snap the EASY LOCK
®
tab into the bell.
Figure 14
-
3: Remove Tab
Figure 14
-
4: Turning Bearing
Summary of Contents for 2720
