6
Introduction to CONNEX ProSight|Quick Installation Layout
Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017
Navigation pane
Quick Installation Layout
Flight controller
Pairing with an additional receiver/transmitter
5.
Connect HD receiver
power and video
4.
Connect transmitter power
3.
Connect to flight controller
1.
Connect camera
2.
Connect antenna cables
Keep the camera cable
as far as possible from
any high power cables
and ESCs.
The delivered transmitter and receiver are already paired.
Connect the units with a USB cable and USB to USB OTG adapter.
Paring is done automatically. Verify link LED is constantly ON.
6.
Verify
communication
For best range and link
robustness, route the cable
away from the antenna body.
2S- 4S battery,
7-17V
2S- 4S battery,
7-17V
Caution:
The antenna cable minimum
bend radius is 5mm.
The camera cable should be
connected vertically to the connector
to avoid physical damage to the
connector's pins.
CONNEX ProSight Installation and Operation Guide
