20
Installing the Units|Wiring the HD Transmitter
Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017
Navigation pane
B-
Connecting to Flight Controller
Wiring the Telemetry Cable
or the
to
the HD transmitter telemetry port (1) and the other end as to the flight
controller as follows:
•
Connect the fourth wire (2) to the flight controller UART Tx port.
•
Connect the third wire (3) to the flight controller UART GND
port.
2
3
1
Tips:
The HD transmitter can connect to any flight controller with a
MAVLink output port.
Obtain your own cable to connect a flight controller which is not
Naze nor CC3D. .
CONNEX ProSight Installation and Operation Guide
