AMIMON CONNEX ProSight Installation And Operation Manual Download Page 23

Page: 23 / 90

Home Page

Safety

Introduction to CONNEX

ProSight

Opening the Package

Installing the Units

Operating the Units

Configuration Using

Installing the Units|Wiring the HD Transmitter

Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017

Navigation pane

C-

Connecting to a Power Source

Connect the

HD Transmitter Power Cable

to the HD transmitter power

socket (1) and the other end to the power source.

Notes:

• Be sure to connect the red wire to the positive pole and the black

wire to the negative pole of the power source.

• The HD transmitter can be connected directly to the battery. It is

compatible with 7V to 17V, or 2S to 4S batteries.

CONNEX ProSight Installation and Operation Guide

Summary of Contents for CONNEX ProSight



























































































Search results

Summary of Contents for CONNEX ProSight

Reviews:

Related manuals for CONNEX ProSight

Brands by name

Popular brands

AMIMON CONNEX ProSight, Installation And Operation Manual

Search results

Summary of Contents for CONNEX ProSight

Reviews:

Related manuals for CONNEX ProSight

Brands by name

Popular brands