67
CLEANING AND CARE
Step 2: Take apart the milk frother into two parts and rinse with clean water.
You can use a brush to clean the above area without leaving behind any residue.
Step 3: Put the milk frother back into place.
Step 4: Place the milk frother in the appliance.
Clean the milk container and the milk container connecting tube
Note! It is important to carry out these steps every day to make sure that the Automatic Milk
Frother operates properly.
1. Pour the milk from the milk container and rinse it with clean water. Remove the rubber connector and
the milk container tube to rinse them with clean water as well. Then securely attach them to the lid.
2. Rinse both ends of the milk tube with clean water to make sure the hole in the milk tube connector
is clean (see below). You can use a needle or a bristle brush to clean the opening.
3. Fill the milk container with clean water and connect it to the appliance with the milk container tube.
4. When you press the frothing button use the frothing function when there is water in the milk contain
er you will clean the inner connecting tube. Press the frothing button again to stop the cleaning.