61
V. MAKE THE CAPPUCINO (Fig. 5).
OPERATION
1. Insert the rubber connector into the slot inside the lid.
2. Insert the tube of the milk container into the rubber connector inside the lid.
3. Insert the milk connection tube into the rubber connector on the outside of the lid.
4. Insert the connector of the milk tube into the inlet of the milk frother (open the inlet cap first).
5
1
2
3
4
Note!
There is a protective cap on the inlet of the milk tube connector, just remove it when you need to
insert the milk tube connector.
Protective cap
1. Fill the milk container with milk and close the lid. Make sure that the drip tray is under the coffee spout
and water tank is installed and then press the power on / off button to turn on the appliance. The appli
ance will automatically purge the system with a small cup of water. Press the
button to stop this.
2. Place a cup under the spout.