Amibot Spirit LASER, User Manual

Page: 26 / 216

24
Maintenance
EN
Compartments and filters
You should empty the dust bin every time the robot completes a
cleaning cycle. Remove the robot's dust bin by pressing the release
button and empty it by opening the magnetic cover.
Then check that there is no dirt obstructing the robot's vacuum
system.
Dust bin
Filters
Open the dust bin to access the filters and clean them.
1. The HEPA filter cannot be cleaned, otherwise it would become
damaged. To extend the filter's life, gently shake it outside to
remove any small dust particles that could accumulate. If the
HEPA filter is damaged, you are recommended to replace it
to ensure that your robot's filter performance is maintained.
2. Carefully shake the prefilter to remove any dust particles and
clean it with clean water. Let it completely dry before putting it
back in the dust bin.
1
2