Amiad Water Systems | 2019
TEQUATIC™ PLUS F-150 Filter, C-series Skid
4
Introduction
1. Introduction
1.1 Safety Information
1.1.1 Symbols
It is important for you to read and understand the information in this manual prior to installation
and operation of TEQUATIC™ PLUS Filter skids. This manual contains information designed to
facilitate operator safety and prevent problems. The symbols below are used to reinforce key messages
throughout.
Danger:
Indicates a potentially hazardous situation which, if not avoided, will result in death or serious
injury.
Warning:
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Caution:
Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury.
Notice:
Indicates a potential situation which, if not avoided, can result in property damage or damage
to the equipment.
Note:
Indicates information, notes or tips for improving your success using the equipment.
1.1.2 Personnel Safety Messages
•
To avoid risk of personal injury or equipment damage, please read and understand all of the
safety precautions and instructions in this section and throughout this manual before servicing or
operating this equipment.
•
Personnel responsible for system operation and/or maintenance should attend all available safety
and operator training courses. Procedures, safeguards and training should be appropriate for the
types of hazards present.
•
Always disconnect electrical power from the system prior to any service of the equipment, including
opening of any electrical panel.
•
Lockout/tagout procedures should be established and utilized as appropriate for servicing the
equipment.
•
Operators should be familiar with the location and use of all safety devices on the machine. Do not
use the machine if it is not in proper operating condition, and report any damage or operation faults
immediately.
•
Make sure that the floors in the work area are dry and non-slip. Keep the work area clean to
promote safety, and to avoid or identify working hazards.
•
Always wear appropriate personal protective equipment (PPE), such as steel-toed shoes, safety glasses,
hard hats, and long sleeves during installation, operation and maintenance of the system. Additional
PPE may be required depending on the application environment and materials being used.
