Amiad Water Systems | 2019
TEQUATIC™ PLUS F-150 Filter, C-series Skid
36
Maintenance
7. Secure a 4-point hoisting chain to the four
lifting eyes on the top of the filter housing.
8. Lift the upper filter housing straight up until
it is clear of the alignment pins, and move it
clear of the filter housing.
Caution:
Use care when lifting or lowering
the upper filter housing. The
housing is heavy, and also poses
pinch-points between the upper
and lower surfaces. Be aware of
any binding on locating pins.
9. For safety, lower the upper housing on to a
non-marring surface, such as wooden cribbing
or a pallet. Avoid resting it on the floor, as the
mating surface could be damaged.
10. Rotate the top adapter counterclockwise to
release it from the filter, and remove the
adapter.
•
Note that the filter also rotates counterclockwise, so
you may feel two stops before the adapter unlocks from
the filter.
•
The filter adapter serves two purposes. It serves as the
interface between the center of the filter and the upper
housing, and also retains the cleaning assembly to the
top of the filter.
11. To remove the cleaning assembly, rotate clockwise (with
the grain of the brush bristles) while lifting it off the filter.
•
Inspect the brushes for wear or damage. If many of the
bristles are broken, kinked, or missing, replace the
cleaning assembly.
12. Rotate the filter approximately 1/8-turn counterclockwise
to unlock it from the vortex plate, and remove the filter.
(It may have already rotated during top plate and cleaning
assembly removal.)
13. (Optional) The water insert/Vortex Plate Assembly doesn’t
specifically need to be removed for cleaning but if
necessary carefully remove the 4 mounting screws from
the Vortex Plate and remove the assembly.
Alignment
Pins
4-Point
Hoist Chain
Water Insert
Vortex Plate
O-Ring
Upper Filter
Housing
Top
Adapter
Cleaning
Assembly
Filter
