Amiad Water Systems | 2019
TEQUATIC™ PLUS F-150 Filter, C-series Skid
17
Controls Overview
3. Controls Overview
The TEQUATIC™ PLUS F-150 C-Series Skid system is
operated with a PLC controller and touch screen
display. The display provides status information
about the system and also the primary operator
interface. The functions of the operator interface
are presented on various screens, which are
described in the sections below.
Each screen contains a set of navigation buttons
(Home, Settings, Clock, Alarms) for moving to the
various other screens. Touching any of these four
buttons will navigate the display to the applicable
screen. These screens and their purposes are
described in subsequent sections. Software can be updated as improvements are made. Actual screens
may vary slightly as improvements are made.
3.1 Home Screen
The home screen provides a visual snapshot of the system operation, and serves as the primary Start
and Stop function of the system. The home screen also provides manual control of the various pumps
and valves. The individual functions are described below. Components will be displayed or hidden
depending on whether they are enabled or disabled.
Home
Settings
Clock
Alarms
A. CIP Kit Hot Water Valve Status
B. Housing Pressure (High Pressure)
C. Time Until Next Scheduled CIP Event
D. Differential Pressure Across Filter Screen
E. Message Center
F. Cleaning Assembly RPM
G. Filtrate Valve Status
H. Filtrate Pressure (Low Pressure)
I. Time Until Next Scheduled Forward Spin
Event
J. Feed Tank
K. CIP Trigger Button
L. Recirculation Pump Speed (Percent Of
Maximum)
M. System Start Button
N. Manual Forward Spin Trigger Button
O. Purge Valve 1 Status
P. System Stop Button
Q. Time Until Next Scheduled Purge Event
R. Drain and Air Bleed Button
S. Product Tank
Some items shown below may not be present on all
systems, depending on installed options.
B
D E
H
M
P
K
N
G
R
A
C
I
J
L
O
Q
S
F
