AMI Analyzer Manual
Preface
1
Preface
Thank You
For purchasing a state of the art oxygen analyzer.
The 111 series of analyzers provide unmatched accuracy,
reliability and longevity among percent level oxygen analyzers. They use an innovative zirconium oxide
sensor that is highly stable, and minimally responsive to pressure changes, thus making the analyzer one of
the few not to be affected by barometric pressure changes.
The standard model, called 111, is intended for positive pressure samples up to 100psig; the 111P adds a
pump that allows it to operate on low pressure and vacuum samples from plus 10psig to 15 inches of
mercury vacuum (7.5psia). Both analyzers are battery powered, but may be operated indefinitely from the
wall charger supplied. They are CE marked, meaning that they meet the European (and thus by default the
American) standards for EMI immunity and safety in a general purpose area. They are not designed for use
with flammable samples or in a hazardous area.
Oxygen analysis can be a problematical area for people with no experience in it
–
and AMI is always happy
to help you if you run into any problems. Please feel free to call
at any time for help.
Caution
Read and understand this manual fully before attempting to use the instrument. In particular understand
the hazards associated with using flammable or poisonous gases.
Address
Advanced Micro Instruments.
225 Paularino Avenue
Costa Mesa
, CA 926
26
(714)
848-5533
www.
AMIO2
.com
The unit meets the requirements of EN 61326-1 2006 and EN 61010-1.
It is therefore CE marked.
Last Revised: 08/31/2018
