4
B.
Equipment storage and installation requirements.
The equipment should be stored or installed in a shady, normal temperature, ventilated
and dry place.
C.
The equipment should be unload and transfer by forklift.
D. POWER SUPPLY
The electrical source must be 2.0HP
minimum. The source cable size must be
2.5mm² and in good condition of contacting with floor.
III. STEPS OF INSTALLATION
A. Check the parts before assembly
1. Packaged lift, Parts box, Control cabinet and tubing cover plate
(See Fig. 4)
.
Fig. 5
Fig. 4
