S-4000 BH Omron
1-57
Released 05/2010
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
F - MACHINE MAINTENANCE
4 . M AC H I N E L U B R I C AT I O N
1.
It is necessary to lubricate the places shown below before the machine is switched on for the first time
or after a long idle period. Use oil ESSO TERESSO 32 or similar quality.
2.
The amount of oil in the reservoir
➊
is indicated by the red mark. Too much oil may cause its
overflowing from the base area.
3.
The reservoir is filled through the hole
➋
in front of the gage
.
4.
The points for lubrication of the needle bar mechanism
➌
and draw-off mechanism
➍
are shown in
the illustration below (after opening the needle bar cover
➎
)
. Lubricate the main cam worm gear
through the hole
➏
. Lubricate all of these points every 8 hours.
Summary of Contents for S-4000 BH Omron
Page 4: ......