S-4000 BH Omron
1-22
Released 05/2010
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
4 . T H E P R O G R A M M I N G M E N U
Main screen
- press
,
appears on the
display. To enter the programming menu, press
key.
appears on the
display. The first line of the display indicates the parameter, which is possible to set, and the second line
indicates the range of setting. To scroll the lines down press
key, to scroll the lines up, press
key. To change the value of any parameter, press
key. Press
key to set the first digit.
Press
key. The second digit starts flashing on the display. To set the value, press
key. Press
key again. The third digit starts flashing on the display. Repeat this setting until all digits of a
parameter are set. to confirm the set value of a parameter, press
key.
D - MACHINE CONTROLS
3 . C O N T RO L PA N E L I N F O R M AT I O N
Display message:
❍
Ready
❍
Emerg. Stop
❍
Service mode
❍
Wait please
❍
Ready F1
Service F6
❍
Motor not ready
❍
Low voltage
❍
Low air pressure
Standard messages:
Error messages:
WARNING!
Keep your hands away from the needle area during any adjustment. Machine start is controlled
by the foot pedal. Keep your foot off of the foot pedal.
Error messages on the display are mentioned in
T r o u b l e s h o o t in g
section.
Daily cycle counter
Summary of Contents for S-4000 BH Omron
Page 4: ......