S-4000 BH Omron
1-7
Revised 06/2010
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 286; Fax: +420 582 360 606
A
-
INTRODUCTION
CAUTION!
-
Perform all regular service as described by this manual.
-
If there is any problem with the power supply, turn off the main power switch.
-
Do not remove, paint over, damage or in any way change safety labels. If a safety label cannot be
easily read, replace it.
-
Long hair and loose clothing may be dangerous near any machinery. Always contain long hair
and avoid loose clothing, so that it cannot be caught by machinery and cause injury.
-
Never use this machine while under the influence of drugs or alcohol.
-
If anything seems to be operating incorrectly in the machine call for maintenance assistance
immediately.
-
Be sure that there is adequate light for safe operation. A normal minimum light level is 750 lux.
7 . S P E C IA L AC C E S S O R I E S
-
machine device, which is not included in the standard equipment of the machine and can be ordered by
the customer
Light
-
customer can order - no. 12.0008.4.403
-
connection according to chart (terminal connectors
X0;cable clamps N,L)
Warning:
When turning on the light on the machine,
disconnect the machine from the power supply.
-
in case, you do not want to interfere into the machine
wiring, it is possible to order the work light LBH-T65,
order no. 12.0008.4.875, which contains its own clip
fork the table and supply conductor with foprk (plug)
CEE7 for connection to the power supply ~ 230 V.
N e e d l e s 7 5 0 S C 8 0 / 1 2 , 70/10
-
the manufacturer recommends to use these needles when sewing thin material
-
order number 02.0750.2.100 (80/12), 02.0750.2.109 (70/10)
Summary of Contents for S-4000 BH Omron
Page 4: ......