S-4000 LT
1-5
Revised 10/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phone: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
5 . I N S T RU C T I O N S F O R O P E R AT O R S A F E TY A N D M A I N T E N A N C E
When installing the machine we recommend the minimum clearances noted above around the machine.
Read all of the instructions that follow. DO NOT PUT THE MACHINE INTO OPERATION UNTIL YOU
ARE COMPLETELY FAMILIAR WITH ALL INSTALLATION AND OPERATING INSTRUCTIONS.
DANGER!
-
Before connecting the machine to the power supply, be positive that all safety covers are correctly
installed.
-
Always engage the power lockout switch, or disconnect the main power supply, before removing
any safety covers.
WARNING!
-
Locate the Emergency Stop button. Be sure you know how to use it.
-
Be sure that you have a reliable and uniform power supply.
-
Be sure that all electrical supply lines are in good condition and have no signs of damage to avoid
electrical shock.
-
If any covers become damaged, they must be repaired or replaced immediately.
-
Do not touch moving parts of the machine while it is operating.
-
Keep clear of the needle.
-
Always switch off the main power before changing the needle.
-
Before cleaning the machine or performing service to the machine, engage the power lock out switch
or disconnect the main power supply.
-
When the machine is not in use engage the power lock out switch or
disconnect the main power supply.
-
When this machine is used incorrectly, or is incorrectly maintained, it can be dangerous.
Everyone who uses this machine, or maintains this machine, must be completely familiar with this
manual.
A - INTRODUCTION