AMF REECE S-105, Parts And Service Manual, Page: 43 / 68

Revised 12/2007
E-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
S-105
1-31
D - MACHINE ADJUSTMENT
6 . B U T T O N H O L E S H A P E A D J U S T M E N T
To adjust the buttonhole shape, it is necessary to create a new stitching pattern.
6.1. Check the new stitching pattern and determine where to adjust the nut
Ê Ê Ê Ê Ê
to obtain the right eye shape. Use
the examples below as guidance.
6.2. Once you loosen the nut Ê Ê Ê Ê Ê placed on the lever Ë Ë Ë Ë Ë move this nut upwards or downwards as needed. If the
eye shape corresponds with the picture in the example A, move the nut Ê Ê
Ê Ê Ê
downwards. If the eye shape
corresponds with picture in B, move the nut Ê Ê
Ê Ê
Ê upwards.
6.3. Tighten the nut Ê Ê
Ê Ê Ê
after the adjustment. Start the machine and make another stitch pattern. If we did not obtain
the required eye shape on the sample, repeat the above mentioned steps.
NOTE: It is a standard procedure to repeat the process several times.
Buttonhole
shape:
Example A Example B
Ê
Ë