LIFTSYSTEME
KASSETTENLIFT
K90
1.2
Construction
The Back-in-Box-Lift is made up of the following assemblies:
1. VA-steel box
2. Inner gear
3. Hydraulic cylinders
4. lifting platform
Changeable
devices
(-none-)
Technical changings reserved
1.3
Function
The Back-in-Box-Lift serves to lift and lower disabled persons into a vehicle.
It exist of a VA-steel box, four lifting arms, one lifting platform and one run down platform.
Ensue by a hand switch for the functions "up", "down", "in", "out" as well as the "stow
position".
The hydraulic aggregate is located outside of the VA-steel box under or in the vehicle
The bearings are maintenance free and need no grease.
The drive ensue electrohydraulical with 12V main voltage.
1 2
3 4
