17
amewi.com
Propeller replacement
Spare parts replacement instruction diagram
1. Squeeze the motor and fix it in position by hand (Picture 12)
;
2. Use the tool to remove the anti-slip nut in the back of propeller in
counterclockwise direction and pull out the propeller;
3. Install the new propeller as picture shown.
4. Use the tool to fix the anti-slip nut in clockwise direction.
Notice: 1. Cut off the power before you replace the propeller.
2. The side with notch of propeller shall fit toward the fixed part of propeller,
otherwise the boat can not sail.
Steel rope replacement instruction
Picture 15
Picture 14
Picture 12
Propeller install direction
Picture 13
Notice: The steel rope will be cut off easily when it gets stuck with waste.Please make sure
to avoid the waste in the water. Please cut off the power before you replace the steel
rope.
1. Squeeze the motor and fix it in position by hand (Picture 12)
2. Use the tool to remove the anti-slip nut back of propeller in clockwise and pull
out the propeller.
3. Use the provided hexagon wrench to remove
the fixed part of propeller. (Picture 14)
4. Use 2 provided wrenches to remove the steel
rope fixed part in counterclockwise, then pull
out the damaged steel rope.
5. The procedure of steer rope replacement is
reverse of the disassemble procedure.
Wrench
Pull out
Fixed part of
steel rope
Motor
Summary of Contents for 26088
Page 3: ...3 ...