background image

7

Security Warning

Charging operation(Diagram)

1. When charging, the balance charger should be put in dry and ventilated place,
    keep the battery away from flammable material or liquid.

2. The balance charger only can charge for Lithium polymer batteries. It only can 
    charge a group of 2 strings or 3 strings of batteries, can not charge for 2 or 
    above groups of batteries at the same time, otherwise it will damage the charger 
    or batteries.
3. When charging, you must pick out the battery from the boat. Do not leave the 
    battery without supervision when charging to avoid any accident.

4. Don’t charge for the Lipo batteries at once after running, and the battery is still 
    not yet cooling down. Otherwise, it may cause battery to get swollen.

5. Before connecting the battery and charger, please make sure that the polarity 
    is correct.

6. When charging the battery, please make sure no external force impact or fall 
    down, otherwise it may cause internal short circuit and result in danger.

7. In order to make sure your safe usage, please obey the instruction and use 
    original charging configuration( Power adapter and balance charger) and Lipo 
    battery. When the Lipo battery gets aging and bulging, please replace with new
    one in time.

8. After fully charged the battery, if don’t remove it from the charger for some time,
    then it may cause auto discharge and resulting in battery power loss. When the
    charger defects the voltage is lower than rating voltage, then it will charge again 
    until full. Long-term repeated charge and discharge may shorten the battery life. 

Power input socket

11.1V battery pack 

charging socket

Plug the adapter into the 
AC power socket AC
100-240V, its output end 
to connect with balance 
charger and the red indicator 
of balance charger keep solid, 
the green indicator will keep 
flashing alternatively.

Plug the battery 
connector into the 
balance charger 
port.

When charging, 
the green indicator 
will keep solid green.

After fully charged, 
the green indicator 
will be off.

Power indicator Charging/ fully 

charged indicator

7.4V battery pack

charging socket

amewi.com

Charging Instruction for balance charger

Summary of Contents for 26088





















Reviews: