Ametek Powervar 3400 Series User Manual Download

Page: 6 / 68

A01-00119 Rev. B

NOTE TO USERS

To ensure correct operation of the UPS, please read this instruction

manual carefully. Please keep this manual handy for future reference.

This UPS has dangerously high voltages on both its Input

and output connections. Contact with these voltages may

be life threatening. Please follow the operating instructions

carefully. Please give close attention to the warnings in

this manual and those posted on the UPS.There are no

user serviceable parts inside the UPS. Disassembly and/or

maintenance should only be done by authorized personnel.

IMPORTANT INFORMATION FOR USERS OF

THIS UNINTERRUPTIBLE POWER SUPPLY

1. Before operating the UPS or connecting any load equipment, please

ensure the UPS is connected to a properly grounded electrical

supply.

2. This UPS has dangerously high voltages on both its input and

output connections. Contact with these voltages may be life

threatening.

3. Please do not disassemble the covers. There is a risk of electric

shock.

4. In an emergency, immediately turn off the circuit breaker for the

circuit supplying power to the UPS. Also immediately turn off the

battery circuit breaker.

5. This UPS has two power sources. One is the circuit supplying the

UPS with input power. The other is the UPS battery. Prior to any

maintenance, both of these power sources must be disconnected

to ensure that the UPS is de-energized. If only the input power

is disconnected, the UPS can still operate from the battery, and

hazardous voltages may still exist.

Summary of Contents for Powervar 3400 Series





































































Search results

Summary of Contents for Powervar 3400 Series

Reviews:

Related manuals for Powervar 3400 Series

Brands by name

Popular brands

Ametek Powervar 3400 Series, User Manual

Search results

Summary of Contents for Powervar 3400 Series

Reviews:

Related manuals for Powervar 3400 Series

Brands by name

Popular brands