64
Installation, Operation and Maintenance Manual
OXYvisor Optical Oxygen Analyzer
Firmware Upgrade
If necessary the firmware can be updated via a USB stick and initiated via this screen
Reset to Factory Defaults
The analyzer can be reset to all of its original default factory settings.
5.14.7 - Diagnostic - Test Security - Firmware Upgrade
5.14.8 - Diagnostic - Test Security - Reset to Factory Defaults
5.15 Sub-Menu - Datalogging - Flow Menu
Datalogging
This sub-menu allows for the user to view the on-board error and calibration logs along with setting up and
starting the data-logger
Error Log
- Shows the last 10 errors with date and time stamps.
Calibration Log
- Shows the last 10 calibrations with date and time stamps.
Data Log
- Start or stop the current data logging set.
Download
- Either via .csv or .txt file
Data Trend Setup
- Select the parameters to download (O
2
, Temp, Press, Phase Angle, Signal Intensity).
Deadband
- Assign the the set-point as high or low. Enter the Deadband in % O2.
5.15.1 - Diagnostic - Datalogging
Figure 36 - Sub-Menu Datalogging Flow Menu
Datalogging
Error Log
Data Log
.csv File
.txt Delimited File
Data Trend
Setup
Stop data logging
Start data logging
Datalogging
Status
Download
Log File
Last 10 errors
Calibration
Log
Parameter to
log
Signal Intensity
Phase Angle
Oxygen
Process Temperature
Process Pressure
Diag-Test
Security