27
Installation, Operation & Maintenance Manual
OXYvisor Optical Oxygen Analyzer
1. Locate the proper height for the HMI and display so that it is easily accessible for user
2. Install the L-bracket to the analyzer by tightening down the (4) M6 slotted screws.
3. Install the U-bolt around the pipe at the proper height into the L-bracket and tighten the M8 nuts
4. Double check tightness of the screws and bolts
1. Locate the proper height for the HMI and display so that it is easily accessible for user
2. Install the L-bracket to the analyzer by tightening down the (4) M6 slotted screws.
3. Install the U-bolt around the pipe at the proper height into the L-bracket and tighten the M8 nuts
4. Double check tightness of the screws and bolts
4.5.2 OXYvisor - Pipe-Mount to Vertical Pipe
4.5.3 OXYvisor - Pipe-Mount to Horizontal Pipe
Figure 8 - OXYvisor Vertical Pipe Mount Examples
Figure 9 - OXYvisor Horizontal Pipe Mount Example
1-1/2” to
2-1/4“ pipe
or similar
(2) 316 SS
M8 Nut
316 SS
U-Bolt
(4) 316 SS M6
Slotted Screws
316 SS L-Bracket
(4) 3/4” NPT or M25x
1.5 6H Conduit Ports
VERTICAL PIPE MOUNT - TOP VIEW
316 SS Pipe
Mount Bracket
Back
Front
ESC
OXYvisor
1-1/2” to
2-1/4” pipe
orsimilar
Vertical Pipe Install - FRONT VIEW
Horizontal Pipe Install - TOP VIEW
1-1/2” to
2-1/4” pipe
orsimilar
Back
Front
1-1/2” to
2-1/4” pipe
or similar
(2) M8 Nuts
(4) M6 Slotted Screws
ESC
OXYvisor
(4) 3/4” NPT
or M25x1.5
6H Conduit
Ports
316 SS Pipe
Mount Bracket
Horizontal Pipe Install - FRONT VIEW
316 SS L-Bracket
316 SS
U-Bolt
Section 4
Installation