Section A
Page 1
FTI-Eb Fixed Thermal Imaging System
Installation Guide
A1 Introduction
This Installation Guide gives instructions on how to the install the Land Fixed
Thermal Imaging System with FTI-Eb cameras. The system is operated via
the
LIPS-FTI-Eb
software.
These instructions are provided as a series of simple installation diagrams,
covering the installation of the FTI-Eb thermal camera and its mountings,
accessories and services.
The equipment must be used, maintained and serviced by properly trained
personnel, capable of following the procedures given in these instructions.
Safety may be impaired if the system is not used as indicated.
It is important to check the equipment with which you have been supplied
and then read these instructions thoroughly before proceeding with operation.
