Section A
Page 5
FTI-Eb Fixed Thermal Imaging System
Installation Guide
‘D’ Connector
Land Cable Colour
(using cable: 048.434)
NUDAM Module
Pin 4
Red
}
Green
DATA -
Pin 8
White
Pin 5
Black
}
Yellow
DATA +
Pin 9
Green
• On the port which is connected to the NUDAM input / output modules go into
Properties and then Port Settings
• Check the box for RS485 Half Duplex
• Windows will then ask to restart
The connections to the RS422/485 Serial Comms card are made via the 9-way
D-type connector. The pin assignment details are given below.
