Ametek JOFRA CSC200, Reference Manual

Page: 6 / 20

4
Caution
To avoid possible damage to calibrator or to equipment under test:
• Disconnect the power and discharge all high-voltage capacitors before
testing resistance or continuity.
• Use the proper jacks, function, and range for your measurement or
sourcing application.
• To avoid damaging the plastic lens and case, do not use solvents or
abrasive cleansers.
Clean the calibrator with a soft cloth dampened with water or water and mild
soap.
2. Calibrator Interface
2.1 Display and Inputs
The CSC200 has a large LCD area that displays the function selected and
the input/output value. Input terminals on the top of the calibrator are used
for all TC and RTD connections Figure 1 illustrates many if these features.
2.2 Key Functions
Figure 1 shows the layout of the calibrator keypad while Table 1 lists the
calibrator keys and their functions.